Before Opening we recommend storing your adhesive in the fridge inside it’s original packaging. Storing at below 13C slows down the chemical reaction that causes cyanoacrylate based adhesives to age and will extend their shelf life.
After Opening we recommend storing your adhesive upright in a cool, dark place out of direct sunlight inside it’s ziplock pack along with the silica gel. A cool cupboard or drawer is ideal.
If you’re concerned that the adhesive may be exposed to high temperatures (above 30c) you can store the adhesive upright in the fridge again after use, however the lid must be sealed tight and the adhesive placed back inside the ziplock packet along with the silica gel. It’s extremely important that everything is sealed tight to ensure the adhesive isn’t exposed to the moisture from the fridge as this will rapidly degrade the performance of your adhesive. As an extra precaution you can also store the pack inside an airtight container as well.
Please allow ample time (at least 30 minutes) for the adhesive to get back to room temperature before an appointment.
After dispensing glue ensure that the nozzle is wiped with either foil or sponge to prevent any excess adhesive building up, which will prevent the cap from sealing properly and expose the adhesive to moisture.
Never wipe the nozzle with anything containing natural fibres such as cotton or wool (these can create a fire hazard) or alcohol which may react with the adhesive and cause a blockage in the nozzle.